1.35 kg Counterweight
38,64 €This new 1.35 kg (3 lb) counterweight is designed for SkyHunter, and SkyGuider Pro, as well as other iOptron mounts with a 20mm diameter counterweight shaft, which include:
SkyHunterSkyGuider Pro
Showing 1–24 of 59 results
-
-
1kg Counterweight for SmartEQ
25,76 €1 kg counterweight for iOptron SmartEQTM and SmartEQ ProTM mounts. It will also fit onto a counterweight shaft with a diameter of 16mm.
-
2.5kg Counterweight
51,00 €iOptron 2.5kg Counterweight for the following iOptron mounts: iOptron CEM60/CEM60EC GEM45/GEM45EC/GEM40G CEM40G (NOT for CEM40/CEM40EC!) iEQ45 Pro iEQ45 The counterweight can also be used with other m
-
250mm Dualside Plate (Manfrotto & Arca Swiss Type)
69,00 €This William Optics dovetail plate has both “Manfrotto and Arca Swiss size at opposite side design“ the plate also has two 1/4-20 threaded hole , it’s so easy to use with most camera and camera l
-
2kg Counterweight
45,00 €iOptron 2kg Counterweight for the following iOptron mounts: CEM26/CEM26EC GEM28/GEM28EC AZ Mount Pro iEQ30/iEQ30 Pro CEM25/CEM25P/CEM25EC ZEQ25 The counterweight can also be used with other mounts tha
-
9.5kg Counterweight
139,00 €iOptron 9.5kg Counterweight for the following mounts: CEM70/CEM70G GEM45/GEM45G/GEM45EC iEQ45/iEQ45 Pro CEM60/CEM60EC CEM40G (NOT for CEM40 or CEM40EC)
-
Adjustable AZ/EQ Base
72,68 €Adjustable alt-azimuth base for SkyTrackerTM Pro and SkyGyiderTM Pro mounts. Allows for repositioning during polar alignment while a mount is attached to a tripod. The base has a built-in bubble level
-
Adjustable AZ/EQ Base, 3327
72,68 €Adjustable alt-azimuth base for SkyTrackerTM Pro and SkyGyiderTM Pro mounts. Allows for repositioning during polar alignment while a mount is attached to a tripod. The base has a built-in bubble level
-
Alignment Peg
13,80 €These replacement alignment pegs are for iOptron mounts. It is needed for azimuth adjustment during polar alignment. Please select the correct one for your mount.
HAE69 for HAE69/iEQ45/iEQ45 Pro
-
Alt-Az Base
69,00 €Adjustable alt-azimuth base for SkyTrackerT Pro and SkyGyider Pro mounts. Allows you to adjust the mount during polar alignment. The base has a built-in bubble level. Compatible with Vixen-style dovet
-
Antlia Solar Discover Angle Tilter
64,40 €ANTLIA SOLAR DISCOVER Angle Fast Tilter,
Newton Ring Elimination Ring Input port: 1.25 inches, M42 internal thread Output port: 1.25 inches Angle, 4 degrees -
-
CEM120 10kg Counterweight (<10°)
229,00 €iOptron CEM120 10kg counterweight for low latitudes (<10°).
-
CEM26 CW Shaft Mounting House (Low Latitude)
46,00 €CEM26 counterweight shaft mounting house for low latitude (<10 degree). Small counterweights are also needed for near equator (<5 degree).
-
CEM26/GEM28 Ext Bar
29,44 €This is the extension bar for a CEM26/HEM27/GEM28 mount. It attaches to the original bar and will create more counterbalance torque.
Dimensions:Diameter: 20mm
Net Length: 120mm
Total Length (in -
CEM40 Counterweight Shaft Mounting House
109,00 €CEM40 counterweight shaft mounting house for low latitudes (~10 degrees and lower).
-
CEM40 CW Shaft Mounting House (Low Latitude)
91,08 €CEM40 counterweight shaft mounting house for low latitude (~10 degree and lower).
-
Counterweight 1.35kg
35,00 €This 1.35 kg counterweight is designed for the SkyTracker Pro and the SkyGuider Pro. Compatible with: SkyGuider Pro SkyGuider CubePro Cube-A (AltAz/EQ)* Cube-G* Cube-E* CEM25/ZEQ25 iEQ30 Pro/iEQ30 CEM
-
Counterweight 4.5kg
72,00 €This 4.5 kg counterweight can be used for the following iOptron mount: CEM26/CEM26EC HEM27/HEM27EC GEM28/GEM28EC HEM44/HEM44EC AZ Mount Pro iEQ30/iEQ30 Pro CEM25/CEM25P/CEM25EC ZEQ25 MiniTower Pro Min
-
Counterweight Bar (HEM27)
59,00 €This counterweight bar fits a HEM27 mount. It is also the original CW bar for a CEM26/GEM28 mount. Also suitable for new strainwave mounts. Dimensions: Diameter: 20mm Length: 200mm Length include
-
Counterweight Extension Bar for Skyguider Pro
47,00 €Extension bar for the iOptron SkyGuider Pro counterweight shaft. Provides extra reach for better balance with heavier camera and lens setups.
-
Counterweight shaft for SGP and HAE
32,20 €Counterweight shaft with safety screw for following mounts:
Strain Wave AZ/EQ mount HAE series
SkyGuider Pro
SkyHunter
SkyTracked Pro (CW package)It also can be used as an extension bar
-
Counterweight shaft for SkyGuider Pro
29,00 €iOptron Counterweight shaft for SkyGuider Pro. Can also be used as an extension bar.
-
Cube Counterweight shaft
25,76 €Stainless steel counterweight shaft for iOptron SmartStar CubeTM and CubeProTM mount.
Suggested use with 1.35KG counterweight #8605