Cat Eyes Binoculars
168,00 €Discover a New Way of Seeing
The Cat Eyes binoculars are designed for immersive wide-angle viewing like never before. With an ultra-wide 30° field of view, you can take in expansive scenes at a gla
Showing 145–168 of 583 results
-
-
-
CEM120 10kg Counterweight (<10°)
229,00 €iOptron CEM120 10kg counterweight for low latitudes (<10°).
-
CEM25/ZEQ25 Hard Case
78,20 €This Hard Case for CEM25/ZEQ25 mount protects your mount whether you’re heading out for a night of observation, or when you need to store it. The case features custom-fit foam padding to hold the moun
-
CEM26 CW Shaft Mounting House (Low Latitude)
46,00 €CEM26 counterweight shaft mounting house for low latitude (<10 degree). Small counterweights are also needed for near equator (<5 degree).
-
CEM26 Hard Case
87,40 €This Hard Case for CEM26 mount protects your mount whether you’re heading out for a night of observation, or when you need to store it. The case features custom-fit foam padding to hold the mount in p
-
CEM26/GEM28 Ext Bar
29,44 €This is the extension bar for a CEM26/HEM27/GEM28 mount. It attaches to the original bar and will create more counterbalance torque.
Dimensions:Diameter: 20mm
Net Length: 120mm
Total Length (in -
CEM26/GEM28/CEM40/GEM45 GPS Module
94,05 €GPS module for iOptron CEM26/GEM28/CEM40/GEM45 mounts. 6P6C connection cable included.
-
CEM40 Counterweight Shaft Mounting House
109,00 €CEM40 counterweight shaft mounting house for low latitudes (~10 degrees and lower).
-
CEM40 CW Shaft Mounting House (Low Latitude)
91,08 €CEM40 counterweight shaft mounting house for low latitude (~10 degree and lower).
-
CEM40 Hard Case
117,76 €This Hard Case for CEM40 mount protects your mount whether you’re heading out for a night of observation, or when you need to store it. The case features custom-fit foam padding to hold the mount in p
-
CEM60 Hard Case
117,76 €This Hard Case for CEM60 mount protects your mount whether you’re heading out for a night of observation, or when you need to store it. The case features custom-fit foam padding to hold the mount in p
-
CEM70 Hard Case
117,76 €This Hard Case for CEM70 mount protects your mount whether you’re heading out for a night of observation, or when you need to store it. The case features custom-fit foam padding to hold the mount in p
-
Center Post for Tri-Pier 360 & Permanent Pier
17,00 €iOptron Center Post for Tri-Pier 360 & Permanent Pier. Allows you to use CEM 60/iEQ45 Pro/iEQ45 mounts with the Tri-Pier 360 and the Permanent Pier.
-
Controller Cable – 6P4C
16,56 €This 6P4C cable connects your Go2Nova Controller to your mount. It works with all iOptron hand controllers. Recommended for Cube, Cube Pro, SmartEQ and CEM25/ZEQ25 mounts.
-
Controller Cable – 6P6C
18,40 €This 6P6C cable connects your Go2Nova Controller to your mount. It also connects between R.A. and DEC ports. It works with all iOptron mounts.
-
Controller Cable – 6P6C (Customized)
23,00 €This long (up to 25 ft), non-coiled 6P6C cable connects your Go2Nova Controller to your mount. It works with all iOptron mounts. Please specify the length when you place the order.
-
Counterweight 1.35kg
35,00 €This 1.35 kg counterweight is designed for the SkyTracker Pro and the SkyGuider Pro. Compatible with: SkyGuider Pro SkyGuider CubePro Cube-A (AltAz/EQ)* Cube-G* Cube-E* CEM25/ZEQ25 iEQ30 Pro/iEQ30 CEM
-
Counterweight 4.5kg
72,00 €This 4.5 kg counterweight can be used for the following iOptron mount: CEM26/CEM26EC HEM27/HEM27EC GEM28/GEM28EC HEM44/HEM44EC AZ Mount Pro iEQ30/iEQ30 Pro CEM25/CEM25P/CEM25EC ZEQ25 MiniTower Pro Min
-
Counterweight Bar (HEM27)
59,00 €This counterweight bar fits a HEM27 mount. It is also the original CW bar for a CEM26/GEM28 mount. Also suitable for new strainwave mounts. Dimensions: Diameter: 20mm Length: 200mm Length include
-
Counterweight Extension Bar for Skyguider Pro
47,00 €Extension bar for the iOptron SkyGuider Pro counterweight shaft. Provides extra reach for better balance with heavier camera and lens setups.
-
Counterweight shaft for SGP and HAE
32,20 €Counterweight shaft with safety screw for following mounts:
Strain Wave AZ/EQ mount HAE series
SkyGuider Pro
SkyHunter
SkyTracked Pro (CW package)It also can be used as an extension bar
-
Counterweight shaft for SkyGuider Pro
29,00 €iOptron Counterweight shaft for SkyGuider Pro. Can also be used as an extension bar.
-
CS-1.25 adapter
9,20 €CS-1.25 adapter
Design for guiding camera, it can use to connect the CS lens.Material：Metal
adapter：CS female threads and M28.5*0.6 male threads
Length: 5mm + 2.5mm threads